CT-UART-001 Test Result
Go Back to the Pytest TEST All Index
Test Summary
| Item |
Value |
| Description |
test_uart_timing |
| Category |
timing |
| Environment |
local |
| Result |
PASS |
| Execution time |
0.001 seconds |
| Execution date |
2026-09-10T13:14:37.417112+09:00 |
| Execution ID |
20260910_131437_417021 |
| Test envs |
Value |
| test_os |
windows |
| test_name |
local_01 |
| test_environment |
local |
| test_request |
local_vscode |
Test configs
| Test Item |
Value |
| Test ID |
CT-UART-001 |
| Category |
timing |
| Fixture ID |
FIXTURE-001 |
| Fixture mode |
mock |
| FIXTURE-001 |
Value |
| Interface |
UART |
| Equipment |
Saleae |
| Equipment mode |
mock |
| Interface mode |
mock |
Test Source
| Item |
Value |
| Commit |
85466dd623e39c38f5f179820a9d1c7f3ec015c1 |
| Branch |
main |
Measurement
| Item |
Value |
| expected_baudrate |
921600 |
| measured_baudrate |
921596.667 |
| error |
3.6168981481902543e-06 |
| jitter |
0.00021701388888888888 |
Statistics
| Item |
Value |
| mean |
921596.6666666666 |
| median |
921602.5 |
| min |
921490.0 |
| max |
921690.0 |
| stddev |
67.55656066503748 |
Logs
- Path:
test_reports/results/pytest/test_cases/CT-UART-001
| Item |
Value |
| Test log |
20260910_131437_417021_test.log |
| Test Result |
20260910_131437_417021_result.json |
Local LLM Analysis
| Item |
Value |
| Classification |
Category: Timing |
| Confidence |
0.99 |
| Analyzer |
ollama/deepseek-r1:7b |
| Status |
enabled |
LLM Test Prompt
analyze the test result and provide a detailed report with recommendations for improvement.
Test Result
| Item |
Value |
| Status |
PASS |
| Severity |
LOW |
| Warnings |
0 |
| Needs Escalation |
OFF |
Test Summary
| Item |
Value |
| Summary |
The test for the UART timing configuration passed successfully. The measured baudrate is very close to the expected value, with only a minor discrepancy in the measured_baudrate of 921596.667 compared to the expected 921600. The error percentage is approximately 0.0004%, which is negligible. The jitter observed is also minimal at 0.0002 seconds, indicating a stable timing performance. The mean and median values are very close, suggesting that the data points are tightly clustered around the expected value with no significant outliers. The test environment is set to 'local' and the test case ID is CT-UART-001. The test duration was approximately 0.0007 seconds, which is very short, indicating that the test completed quickly. No issues or warnings were encountered during the test execution, and the source code has not been altered. The test results are reliable and consistent with the expected performance parameters. |
| Failure Analysis |
Test passed successfully with no issues identified. |
| Source Review |
The source code for the test case hasn't been modified, and no additional changes are needed. The test configuration appears to be correctly set up with the expected parameters for the UART timing. |
| Warnings |
None |
| Recommendations |
1. Verify that the Saleae UART device under test (DUT) is functioning correctly and providing the expected data at the correct baudrate. 2. Consider increasing the number of samples for further accuracy if necessary, but the current results are sufficiently reliable. 3. Ensure that the timing configuration in the test setup is accurate and matches the expected operating conditions. 4. If further precision is needed, evaluate the possibility of reducing the test duration or adjusting the equipment's timing accuracy to minimize jitter further. |