CT-UART-001 Test Result
Go Back to the Pytest TEST All Index
Test Summary
| Item |
Value |
| Description |
test_uart_timing |
| Category |
timing |
| Environment |
local |
| Result |
PASS |
| Execution time |
0.001 seconds |
| Execution date |
2026-09-15T15:16:05.569401+09:00 |
| Execution ID |
20260915_151605_569293 |
| Test envs |
Value |
| test_os |
windows |
| test_name |
local_01 |
| test_environment |
local |
| test_request |
local_vscode |
Test configs
| Test Item |
Value |
| Test ID |
CT-UART-001 |
| Category |
timing |
| Fixture ID |
FIXTURE-001 |
| Fixture mode |
mock |
| FIXTURE-001 |
Value |
| Interface |
UART |
| Equipment |
Saleae |
| Equipment mode |
mock |
| Interface mode |
mock |
Test Source
| Item |
Value |
| Commit |
e230e7b077b6d059f085ed9bc3011195382f3ce8 |
| Branch |
main |
Measurement
| Item |
Value |
| expected_baudrate |
921600 |
| measured_baudrate |
921596.667 |
| error |
3.6168981481902543e-06 |
| jitter |
0.00021701388888888888 |
Statistics
| Item |
Value |
| mean |
921596.6666666666 |
| median |
921602.5 |
| min |
921490.0 |
| max |
921690.0 |
| stddev |
67.55656066503748 |
Logs
- Path:
test_reports/results/pytest/test_cases/CT-UART-001
| Item |
Value |
| Test log |
20260915_151605_569293_test.log |
| Test Result |
20260915_151605_569293_result.json |
Local LLM Analysis
| Item |
Value |
| Classification |
Pass |
| Confidence |
0.95 |
| Analyzer |
ollama/deepseek-r1:7b |
| Status |
enabled |
LLM Test Prompt
analyze the test result and provide a detailed report with recommendations for improvement.
Test Result
| Item |
Value |
| Status |
PASS |
| Severity |
LOW |
| Warnings |
0 |
| Needs Escalation |
OFF |
Test Summary
| Item |
Value |
| Summary |
The test for CT-UART-001 has passed successfully with minimal discrepancies in the baudrate and jitter measurements. The measured baudrate is slightly below the expected 921600, differing by approximately 0.004% and the jitter is within acceptable limits, showing a stable performance. The test environment is local with VSCode, using the Saleae uart fixture in mock mode, which emulates a real UART device. The primary source of variation is likely due to the measurement resolution of the test equipment or slight environmental fluctuations. No warnings or errors were encountered during the test execution. |
| Failure Analysis |
Not applicable |
| Source Review |
Not requested |
| Warnings |
None |
| Recommendations |
1. Increase the measurement resolution of the test equipment to further reduce the discrepancy between measured and expected baudrates. 2. Conduct additional testing under varying conditions to assess the device's stability and robustness. 3. Perform a visual inspection of the UART device to ensure proper functionality. 4. Update the fixture configuration to use a more precise simulation model if possible. 5. Consider the impact of environmental factors such as temperature on the device's performance. |