CT-USB-001 Test Result
Go Back to the Pytest TEST All Index
Test summary
| Item |
Value |
| Description |
test_usb_bulk_loopback |
| Category |
communication |
| Environment |
local |
| Result |
PASS |
| Execution time |
0.001 seconds |
| Execution date |
2026-08-19T11:39:37.303678+09:00 |
| Execution ID |
20260819_113937_303585 |
Test configs
| Test Item |
Value |
| Test ID |
CT-USB-001 |
| Category |
communication |
| Fixture ID |
FIXTURE-002 |
| Fixture mode |
mock |
| FIXTURE-002 |
Value |
| Interface |
USB |
| Equipment |
Digilent |
| Equipment mode |
mock |
| Interface mode |
mock |
Test Source
| Item |
Value |
| Commit |
24d6fa5a4676cb4295318a88045843f0f021cb97 |
| Branch |
main |
Measurement
| Item |
Value |
| bytes_transferred |
256 |
| packet_count |
4 |
| max_packet_size |
64 |
| bus_voltage |
5.0 |
| integrity_error |
0.0 |
Statistics
| Item |
Value |
| endpoint |
1 |
| transfer_count |
1 |
Logs
- Path:
test_reports/results/pytest/test_cases/CT-USB-001
| Item |
Value |
| Test log |
20260819_113937_303585_test.log |
| Test Result |
20260819_113937_303585_result.json |
Local LLM Analysis
| Item |
Value |
| Classification |
Pass |
| Confidence |
1.00 |
| Analyzer |
ollama/deepseek-r1:7b |
| Status |
enabled |
LLM Test Prompt
analyze the test result and provide a detailed report with recommendations for improvement.
Test Result
| Item |
Value |
| Status |
PASS |
| Severity |
LOW |
| Warnings |
0 |
| Needs Escalation |
OFF |
Test Summary
| Item |
Value |
| Summary |
Test case CT-USB-001 (test_usb_bulk_loopback) completed successfully with 256 bytes transferred, 4 packets, max size 64 bytes, no integrity errors. The test was run in mock mode with interfaces set to USB, equipment Digilent, and modes enabled for both mock and Hil. The test executed in 0.00066 seconds. All metrics indicate normal operation. No errors or warnings observed. The test result is clean, with no issues reported in logs or warnings. The source code for the test is in commit 24d6fa5a4676cb4295318a88045843f0f021cb97, from main branch. The test fixture is using fixture ID FIXTURE-002 in mock mode with interfaces set to USB, equipment Digilent, and modes enabled for both mock and Hil. |
| Failure Analysis |
No test failures were observed. All metrics are within expected ranges and no issues were detected in the logs or source code. |
| Source Review |
The test source code appears to be clean and free from any issues. No changes or fixes were needed in the source code. The test fixture setup is also correct, with all required parameters properly configured for the test to run smoothly. |
| Warnings |
None |
| Recommendations |
1. Consider enhancing the test coverage by adding more test cases to cover additional scenarios and edge cases related to bulk data transfer on USB devices. 2. Review the test environment setup to ensure all dependencies are correctly configured and any issues are promptly addressed in future tests. 3. Evaluate if any additional logging or monitoring is needed to capture more detailed information for troubleshooting purposes. 4. Ensure that the test fixture is properly integrated with the production environment to confirm that it accurately reflects the real-world conditions under test. |